3000W Class D Mono Subwoofer Amplifier A847276
3000W Class D Mono Subwoofer Amplifier A847276
【3000W Peaker Power & 1500W/900W/600W RMS & 】-- 3000W MAX Power x 1 at 1 ohm, 1500W RMS x 1 at 1 ohm, 900W RMS x 1 at 2 ohms, 600W RMS x 1 at 4 ohms. Frequency Response: 10 to 180 Hz.
【Strong & Powerful Performance】-- Looking like it was carved out of a block of steel, this mono subwoofer amplifier can blast your sub with up to 1500 watts RMS. Its Class D design ensures the amp's high output won't be a burden on your vehicle's electrical system.
【Soft Turn On/Off】-- It automatically turns on when a current appears, so the user does not have to display a special button on the front panel.
【Subsonic & Low-Pass Filter & Bass EQ】-- You can fine-tune your subwoofer cut-off frequency with the integrated LPF and give additional Bass boost of up to 12dB with the built-in Bass EQ. SUBSONIC filter removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
【Protection Control System】-- The amplifier monoblock features include power and protection LED indicators. Thermal, overload, and speaker short protection, which senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system.
Features & Benefits
This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
Designed to drive powerful subwoofers.Low harmonic distortion and high signal-to-noise ratio allow it to maintain clarity and richness of sound.
NOTES:
1. Earthing an amplifier is extremely important and should be done correctly to ensure long life and protection of your product.
2. Wiring and hardware not included with amplifier.
Amplifier Specifications
Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
Soft Delay Turn On/Off Circuit
RCA Input
Screw-type Terminals (for speaker and power cables)
Variable Gain Control
Remote Level Control Port
Selectable 12dB Bass Boost EQ
Bass Boost Freq: 30 Hz - 80Hz
Variable Subsonic Freq: Variable 0 - 50 Hz
Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz
Frequency Response: 10 Hz - 250 Hz
Load Impedance: 4 ohms, minimum load 1 ohm
Signal to Noise Ratio: ＞70db
THD & Noise: ＜0.2%
Total Harmonic Distortion: <1% at Rated Power
RMS @ 4Ω Mono: 1 x 600W
RMS @ 2Ω Mono: 1 x 900W
RMS @ 1Ω Mono: 1 x 1500W
Maximum Power: 3000W
Input level control RCA: 0.2V - 5V
Max. Current consumption (A/4Ω): 160A
Overheat Protect Temperature: 80℃ / 176℉
Size (H x W x D): 36.5 x 23.5 x 5.7cm / 14.37 x 9.25 x 2.24 in
Weight: 3.8kg / 8.4lb
Electronics Car & Vehicle Electronics Car Electronics